CopperSmith Adam Street Gas Light Copper Lantern
A traditional copper gas lantern style; designed using common architectural elements. Available in five finishes: Antique Copper, Matte Black, Graphite, Oil Rubbed Bronze, and Stardust Silver. Accessory options also include: Hurricane Shade and a Turtle Light Adapter.
PLEASE NOTE WHEN ORDERING:
- Photos may not depict accessories or mounting device chosen.
- Bulb count is dependent on size; see sizing under DETAILS.
- The finish selected does not apply to hardware (screws, bolts, chain, latches); hardware is only available in brass. Standard brackets are only available in black.
18th-century architects John and Robert Adam were well known for their enduring and famous works in London, such as The Moffat House Hotel, Hopetoun House, Dumfries House, and most notably the neoclassical Adelphi district where Adam Street is located. This lantern was designed using common architectural elements from these timeless works of architecture. To this day, gas lanterns adorn these fabulous works.
||Ships in 1-3 Weeks
||Hanging - ALL, --- Chain Mount, --- Yoke Mount, Wall - ALL, --- Fancy Scroll Bracket, --- Mustache Bracket, --- Yoke Bracket, Post - ALL, --- Standard Mount
|Number of Sides
||Medium (16.5"-19" tall), Large (20"-27" tall), Extra Large (27.5" or taller)
||Electric - Two Bulbs, Electric - Three Bulbs
||For Wall Mount gas lanterns, the gas line will come directly out of the bottom at a 90-degree angle straight into the wall.
Pier Mount and Post Fitter lanterns will have a valve that comes straight from the bottom of the lantern into the column or post.
Classic Yoke mount lanterns will have a gas line that runs through the lantern, clipped to the inside of the yoke, and up through the down rod.
The gas line does not come out of the mount or back-plate. Please use 1/4″ flexible copper tubing. Always check before roughing in your gas line for installation as position changes with the type of mount.
For electric lights and gas lanterns with electronic igniters, the wiring will come out of the back-plate indicated on the drawing.
All electronic igniters operate on 120V.
All-electric lanterns will have a black tube that encases the wiring from the bottom of the lantern to the mount or back-plate. This does not include any lantern with a Turtle Light Adapter.
The mounting plate for all standard wall mount lanterns is 5”(H) x 6”(W) x 1“(D).
Flush Mount (direct to the wall without a backplate) lanterns have one hole in the back that will be used to mount.
Do not mount to any flammable or heat-sensitive materials.
|About the Manufacturer
||The CopperSmith features one of the largest selections of copper gas and electric lanterns along with many decorative bracket options.
|Dimensions (H x W x EXT)
||18.5" x 10.5" (single burner/2-60W bulbs)
23" x 12" (single burner/2-60W bulbs)
28.5" x 15.5" (single burner/3-60W bulbs)
32" x 17.5" (double burner/3-60W bulbs)